CD60 Motor Start Capacitors

CD60 series aluminum electrolytic capacitor for starting A.C. motor are made of aluminum foil bar as the poles, alumina as dielectric, and semi-solid state electrolyte. All of the components are housed in one compact unit which can be sealed separately in aluminum case, Bakelite, or the ABS case. Standard terminations are lug type, wire or cable type, and non-polarized.

CD60 capacitors are designed with high electrical characteristics and are widely used in single phase A.C. motors with rated voltage of 110 V – 330 V and the frequency of 50 Hz – 60 Hz. CD60 capacitors are often used to get high rotary torque at low starting current and also the motor at a lower starting current under high torque.

Showing all 9 results

Swipe the below table right to left to see all specs.

	Part Number	uF	VAC	D (in)	H (in)	D (mm)	H (mm)	Data Sheet
	CD60-2BJ080B 72-88 uF 220 VAC Capacitor	80	220	1.48	3.82	38	97
	CD60-2EJ4756 47-56 uF 250 VAC Capacitor	47 – 56	250	1.47	3.75	37	95
	CD60-3CJ061 52-70 uF 330 VAC Capacitor	61	330	1.80	3.79	46	96
	CD60-3CJ072 72-93 uF 330 VAC Capacitor	72	330	1.80	3.79	46	96
	CD60-3CJ072-S 72-93 uF 330 VAC Capacitor	72	330	1.80	3.73	46	95
	CD60-3CJ250 225-275 uF 330 VAC Capacitor	250	330	1.98	3.18	50	81
	CD60-3CJ250R 225-275 uF 330 VAC Capacitor	250	330	2.18	4.39	55	112
	CD60-3CJ88108 88-108 uF 330 VAC Capacitor	88 – 108	330	1.78	3.75	45	95
	CD60B-1EJ126 120 uF 150 VAC Capacitor	120	150	1.45	2.77	37	70